Heating, plumbing and electrical services for homes and businesses
- 01772 734966
- info@gosheating.co.uk
- My Account
Air source heat pumps (ASHP) serve as an alternative way to heat your home and could be the ideal solution if you want to generate your own heat and potentially save money on your energy bills. They come into their own when you don’t have access to gas mains.
An air-source heat pump is a system that transfers heat from outside to inside a building or vice versa. Under the principles of vapour compression refrigeration, an ASHP uses a refrigerant system involving a compressor and a condenser to absorb heat at one place and release it at another.
Air source heat pumps can be a fantastic way to create hot water in the home or office. Heat from the air is absorbed at low temperature into a fluid. This fluid then passes through a compressor where its temperature is increased and transfers its higher temperature heat to the heating and hot water circuits of the house.
The benefit of air source heat pumps is that unlike a traditional electric radiator that turns that 1kWh into one unit of useful heat, an air source heat pump converts 1kWh into 3.5 or more units of useful heat. Therefore, electrically run heat pumps are an efficient way to heat the home. However, because the extent of the hot water temperature produced by them is not as much as with a gas boiler, you need to ensure that your home is sufficiently insulated for the heat pump to be able to heat the property sufficiently.
Air source heat pump units look very much like air conditioning units that you may have seen in an office building. The size of the heat pump will be determined by your installer based on your home’s heat demand. The bigger the home and the less insulated the more heat it is going to require. This means having a larger air source heat pump unit. A typical unit might be a meter high by a meter wide with a depth of about half a meter. This will obviously vary greatly between models, but it gives you an idea.
Every installation is different as it depends on several factors and so if you need more information on whether an air source heat pump would work for you then request a free survey and we can help you determine whether an Air Source Heat Pump will work for you.
While most heating systems burn fuel or utilise electric resistance, a heat pump moves existing heat from one place to another. In the case of an air-source heat pump, heat is collected from the outdoor air, concentrated via a compressor, and distributed inside through an indoor room unit. Heat pumps require electricity to run but can deliver more energy than they use because they are concentrating and moving heat rather than generating it directly. In summer, a heat pump’s operation is reversed to air condition your home by moving heat from indoors to outdoors.
With many reasons to choose us for your air source heat pumps in Preston, our team has decided to outline our top 5 reasons. Please see below our top reasons to choose us for your heat pump installations in Preston and the surrounding areas.
Leave your air source heat pumps in the capable hands of GOS and contact our customer services team today to find out how we can help with your heat pump Installation in Preston. Give one of our friendly team members a call today.
Call our team today, to find out how we can help with air source heat pumps. GOS Heating are the professionals you can count on for your every need. Simply give GOS Heating a call today to find out more about air source heat pumps or request a free quote. We will be there for you to provide your air source heat pumps in Preston at a time most suitable for you.
How Do Air Source Heat Pumps Work?
Air Source Heat Pumps absorb heat from the air outside, this heat can then be used to heat radiators, underfloor heating systems, or warm air convectors and hot water in your home.
Heat from the air is absorbed at low temperature into a fluid. This fluid then passes through a compressor where its temperature is increased and transfers its higher temperature heat to the heating and hot water circuits of the house.
There are two main types of air source heat pump systems:
Running costs are affected by many different factors, so it is difficult to make an intelligent estimate without knowing quite a lot about your project. A properly designed heat pump should always be cheaper to run than an oil or LPG boiler, often by a margin of 50% or more. Savings compared to a mains gas boiler may be less, so it is important to consider all aspects of the installation before you decide.
For more information or for your FREE quote call our team today!
Modern air source heat pumps are extremely quiet and should not provide any disturbance to you or your neighbours if installed properly. Planning regulations state that the noise level at the nearest assessment point must be 42dBa or less – approximately the background noise you would expect in a library.
